Power tool use and precautions

Source: YONGKANG GUANLI INDUSTRY & TRADE CO.,LTDRelease time: 2022-05-16

1. Do not abuse the power tool, choose the appropriate power tool according to the use and scope, and choose the appropriate design rating of the power tool will make you work more effectively and safely.

2. If the switch of the power tool can't turn on or off the power properly, you can't use the power tool. Power tools that cannot be controlled by a switch are dangerous and must be repaired.

3. Before making any adjustments, replacing accessories or storing the power tool, it must be unplugged from the power source or the battery compartment must be disconnected from the power source. This protective measure will reduce the risk of sudden start-up of the power tool.

4. Always keep cutting tools sharp and clean. Do not use cutting tools with cracks, chipped edges and sharpened dullness, otherwise it will cause damage to the power tool and personal safety.

5. Use power tools, accessories and tools' cutting tools, etc. in strict accordance with the instruction manual and the special type of power tools you intend to use in a manner that takes into account the operating conditions and the operations to be performed. Using power tools as those operations that do not match the requirements may lead to danger.

6. When connecting power, be sure to pay attention to whether the power supply voltage is the same as the voltage indicated on the tool nameplate. If the voltage of the power supply is higher than the applicable voltage of the tool, it will cause serious accidents to the user, and will also damage the tool itself. If you are not sure of the voltage of the power supply, never just plug it in, you need to notify a professional electrician to confirm.

7. Do not gossip while working, distractions will make you lose control.

8. When operating power tools, use appropriate force. Properly control the progress, too much force or too hard does not improve the efficiency, but will damage the tool and the tool itself.

9. It is strictly forbidden to overload the power tool, or to do operations other than the function of the tool itself, which will cause serious damage to the tool itself.